Atmospheric plasmas in complex processes
smart combination – innovative technologies for practical use
The 48th ak-adp workshop will take place in Chemnitz from April 9-10, 2025 and will focus on the topic: Atmospheric plasmas in complex processes. At the workshop of the Anwenderkreis Atmosphärendruckplasma, Dr. Christian Bäuml from relyon plasma will talk about “Combining cold atmospheric plasma and plasma-activated water in the context of sterilization and disinfection”. In this context, he will especially talk about the MediPlas system – the RONS generator for disinfection and sterilization.
Programm
9. April 2025
from 12:30 p.m. Registration and lunch
01:00 p.m.Opening of the workshop & greetings
Kerstin Horn, INNOVENT e.V. Jena
Greeting: Saxony as a land of innovation – a sightseeing flight over the ecosystem
futureSAX – the innovation platform of the Free State of Saxony, Christiane Demmler & Michael Kelber
01:15 p.m.Plasma chemistry at atmospheric pressure – influence of gas temperature
Dirk Hegemann, empa Switzerland
01:45 p.m. Combinations of inline cleaning processes with atmospheric pressure plasmas for reliable adhesion of coatings and adhesives
Jörg Ihde, Fraunhofer IFAM Bremen
02:15 p.m. Process for the sustainable joining of plastic hybrid materials
Julian Kraft, Fraunhofer Institute for Chemical Technology Pfinztal
02:45 p.m. Combination of cold-atmospheric plasma and plasma-activated water in the context of sterilization and disinfection
Christian Bäuml, relyon plasma GmbH Regensburg
03:15 p.m. Coffee break
04:00 p.m. Antimicrobial active cold plasma spray coatings for contact and contamination surfaces
Adrian Würzl, INNOVENT e.V. Jena
04:30 p.m. Production of gas barrier layers using atmospheric pressure plasmas and photochemical processes
Patrick With, Leibniz-Institut für Oberflächenmodifizierung e.V. (IOM) Leipzig
05:00 p.m. Plasma-induced coating post-processing – modification and removal of baked siliconized coatings on glass substrates
Daniel Tasche, HAWK Göttingen
06:00 p.m. Evening event
from 07:30 p.m. Regulars’ table
10. April 2025
09:00 am Atmospheric pressure plasma technology tool – can be combined in a variety of ways in industrial applications
Peter van Steenacker, TIGRES GmbH Marschacht
09:30 am Two examples of industrial surface modification with atmospheric pressure plasma: New approaches to thin-film PV production and plasma-assisted surface pretreatment of die-cast aluminum components
Simon Chwatal, INO GmbH Attnang-Puchheim, Austria
10:00 a.m. Follow-up to the impulse discussion contribution of the 45th ak-adp workshop:
“Atmospheric pressure plasma and AI – a symbiosis for the future!”
Mike Espig, Westsächsische Hochschule Zwickau
10:45 am Coffee break
11:30 a.m. Competition #FutureADPAtmospheric plasmas – a technology with future potential?
approx. 01:30 p.m. concluding lunch
Registration and further information
Have we aroused your interest in the 48th ak-adp workshop “Atmospheric plasmas in complex processes”? Then you can register here and receive further information.
Register now >>About ak-adp
ak-adp stands for the atmospheric pressure plasma user group. The ak-adp is a practical user forum for all ideas relating to the innovative technology of surface treatment with atmospheric pressure plasma. The industrial research institute INNOVENT from Jena initiated the user group in 2009 and has since reached more than 1400 interested parties.
