Surface coating

A bonding problem often occurs during the surface coating process. However, components can be modified by plasma in such a way that the adhesion of the surface coating is significantly improved. This effect is achieved by the fact that a fine cleaning of the surface is carried out by the pre-treatment with plasma, during which a plasma activation takes place at the same time. Plasma pretreatment leads to an improvement of the adhesion and thus the coating result.

• 07.02.2023

  Plasmacleaning – Article magazin “JOT”

  

  Paint stripping and cleaning with plasma is possible with the high performance system plasmabrush® PB3 of relyon plasma.

• 19.10.2019

  Application of a pulsed atmospheric arc plasma jet for low‐density polyethylene coating

  

  The article describes the development of a method for deposition of low‐density polyethylene (LDPE) on rotating three‐dimensional aluminum alloy substrates is presented.

• 14.08.2019

  Reference: TAZ Spiegelau

  

  TAZ Spiegelau is researching on the coating of glass beads with plasma from the plasmabrush PB3.

• 12.07.2019

  Precision in the fourth dimension

  

  Without the application of plasma technologies, many industrial processes cannot be realized, or can only be realized at great expense. That is why Relyon Plasma has developed a concept to automate the handling of plasma generators – with robots of Kawasaki.